Pre-Launch · Key Specifications Released

Sattva Courtyard Specifications

Sattva Courtyard specifications — 7 residential towers of 2B+G+41 on 10 acres 4 guntas, 1,000+ apartments and 80% open spaces, with a seismic-resistant superstructure, vitrified and anti-skid ceramic tile flooring, flush-shutter and aluminium/UPVC sliding doors, chromium-plated fittings, passenger and service elevators in each tower, copper wiring, BESCOM power up to 10 kVA per home and DG backup up to 3 kVA per apartment. Brands and a few finishes are still to be confirmed by the developer.

Project, location & connectivity: The project is a development by Sattva Group. The site is on Old Madras Road (NH75), about 300 metres from Cheemasandra Lake and minutes from Budigere Cross, in East Bengaluru, Karnataka. Kempegowda International Airport is within approximately 15–25 km. The city’s metro network is operated by Namma Metro; Whitefield and KR Puram Metro Stations are approximately 5–10 km away.

Specification Sheet

Specification Table, Category by Category


Sattva Courtyard specifications are listed below by category. Rows marked (confirmed) come from the developer brochure and the specifications approved for publication; rows marked “To be confirmed” have not been specified by the developer yet and are deliberately left blank rather than filled with assumptions.

Structure & Development

Sattva Courtyard structural and development specifications
Development TypePremium High-Rise Residential Development (confirmed)
Land Area10 Acres 4 Guntas (confirmed)
Residential Towers7 Towers (Tower 1 to Tower 7) (confirmed)
Tower Configuration2B+G+41 — 2 basements, ground and 41 floors in each tower (confirmed)
Total Apartments1,000+ apartments (confirmed); units per tower and per floor To be confirmed
Open Spaces80% open spaces, including 2 acres of central greens (confirmed)
Ventilation & LayoutFour-sided ventilation, zero shared walls between homes (confirmed)
Clubhouse45,355 sq. ft.; Tower 7 42nd-floor clubhouse level (confirmed)
StructureSeismic-resistant superstructure (confirmed)
MasonryConcrete block masonry (confirmed)

Apartment Configurations

Sattva Courtyard apartment configuration specifications
3 BHKapprox. 1,800 – 2,300 sq. ft. SBA, 3 toilets (confirmed)
4 BHK + Staff Roomapprox. 2,600 – 3,000 sq. ft. SBA, 4 toilets (confirmed)
4 BHK Signature Duplex (Tower 7)5,150 sq. ft. SBA, 4 toilets + staff room (confirmed)
Carpet Area (RERA)Awaited — RERA disclosure pending (sample plans: 3 BHK Type 3d 1,284 sq. ft.; 4 BHK Type 5a 1,793 sq. ft.; Duplex Type 1 3,091 sq. ft.)
Ceiling HeightTo be confirmed
Balcony ProvisionBalconies shown on all sample plans; double-height balconies in the duplex (confirmed)
Unit Handover ConditionTo be confirmed

Flooring & Finishes

Sattva Courtyard flooring and finish specifications
Foyer, Living & DiningVitrified tiles (confirmed)
BedroomsVitrified tiles (confirmed)
KitchenVitrified tiles (confirmed)
ToiletsAnti-skid ceramic tiles (confirmed)
BalconiesAnti-skid ceramic tiles (confirmed)
Tile Brand, Size & GradeTo be confirmed
Toilet Wall DadoTo be confirmed
Internal Wall Finish & PaintTo be confirmed
External Wall FinishTo be confirmed
Ceiling Finish / False CeilingTo be confirmed

Doors & Windows

Sattva Courtyard door and window specifications
Main DoorFlush shutter with paint finish, necessary hardware and architraves on both sides (confirmed)
Internal DoorsFlush shutters with paint finish, necessary hardware and architraves on both sides (confirmed)
Sliding DoorsAluminium/UPVC sliding doors for the living room and bedrooms (confirmed)
Windows & GlazingTo be confirmed

Plumbing & Sanitary

Sattva Courtyard plumbing and sanitary specifications
Sanitary FixturesSanitary fixtures of reputed make in all toilets (confirmed); brand To be confirmed
CP FittingsChromium-plated fittings in all toilets (confirmed); brand To be confirmed
Rainwater HarvestingRainwater-harvesting drain pipes (confirmed)
Water Supply & TreatmentTo be confirmed
Sewage Treatment PlantTo be confirmed

Kitchen & Interiors

Sattva Courtyard kitchen and interior provisions
Kitchen Counter, Sink & FittingsTo be confirmed
Modular Kitchen ProvisionTo be confirmed
Wardrobe ProvisionTo be confirmed
Appliance ProvisionTo be confirmed

Lifts & Security

Sattva Courtyard lift and security specifications
ElevatorsPremium passenger elevators and service elevators in each tower (confirmed)
Number, Capacity & Speed of LiftsTo be confirmed
SecurityRound-the-clock security with intercom (confirmed)
SurveillanceCCTV cameras at all vantage points (confirmed)
Fire Detection & Fighting SystemsTo be confirmed

Electrical

Sattva Courtyard electrical specifications
Power SupplyBESCOM grid power up to 10 kVA per home (confirmed)
WiringCopper wiring in concealed conduits (confirmed)
SwitchesModular switches of reputed make (confirmed); brand To be confirmed
Power BackupDG backup up to 3 kVA per apartment; 100% backup for common areas (confirmed)
EV Charging ProvisionTo be confirmed
Solar ProvisionTo be confirmed

Other Services

Sattva Courtyard other building services
Car ParkingCar parking charges included in the all-inclusive Exclusive EOI price (confirmed); slots per configuration To be confirmed
Telecom, Internet & DTH ProvisionTo be confirmed
Waste ManagementTo be confirmed
Why this page does not list brands. The approved specifications describe sanitary fixtures and modular switches as being “of reputed make”, but tile, sanitary ware, CP fitting, door, window, electrical and kitchen brands have not been officially named for Sattva Courtyard. Property websites frequently fill such gaps with plausible brand names copied from other projects. We do not: an unspecified brand cannot be enforced against the developer, and a buyer who commits money on the strength of an invented specification has no recourse.
Buyer Guidance

How to Verify Sattva Courtyard Specifications


Sattva Courtyard specifications on this page are approved for publication, but they become binding only through official documentation. When the full specification sheet is released, check it in the following order.

1. The agreement for sale

This is the document that binds the developer. A specification that appears in a brochure but not in the agreement is marketing material, not a commitment.

2. The RERA disclosure

Once the RERA registration is completed — currently awaited — pending official Karnataka RERA portal update — the statutory filing will carry declared specifications, common areas and amenities. Cross-check it against the brochure.

3. The sanctioned plan

Verify that structural elements, ceiling heights, balcony provisions and unit layouts match what has been approved by the competent authority.

4. Get substitution clauses in writing

Most specification sheets permit “equivalent or better” substitution. Ask what the substitution criteria are and who determines equivalence.

  • Which brand and grade is specified for each finish?
  • What is the RERA carpet area, and what is excluded from it?
  • What is the clear ceiling height, floor to underside of slab?
  • How many lifts serve each tower, and what is the rated capacity?
  • Are the BESCOM load (up to 10 kVA) and DG backup (up to 3 kVA) for your apartment written into the agreement?
  • How many parking slots are allotted per configuration? (Car parking charges are included in the all-inclusive EOI price.)
  • What is the handover condition — bare shell, semi-finished or fully finished?

See the Sattva Courtyard floor plans, master plan, amenities and price details.

Get the Sattva Courtyard specification sheet

Leave your details and we will send the official specification sheet, brochure and current price sheet as soon as the developer releases them.

Buyer Questions

Specification FAQs — Sattva Courtyard


What the approved specifications cover, and which items are still to be confirmed by the developer.

Sattva Courtyard has 7 residential towers, each 2B+G+41 (2 basements, ground and 41 floors), on 10 acres 4 guntas, with 1,000+ apartments, 80% open spaces, four-sided ventilation with zero shared walls between homes and a 45,355 sq. ft. clubhouse; Tower 7 also has a 42nd-floor clubhouse level. The approved specifications cover a seismic-resistant superstructure with concrete block masonry, vitrified and anti-skid ceramic tile flooring, flush-shutter doors with aluminium/UPVC sliding doors, chromium-plated fittings, passenger and service elevators in each tower, round-the-clock security with intercom and CCTV, copper wiring, BESCOM power up to 10 kVA per home and DG backup up to 3 kVA per apartment. Kitchen, window, wall-finish and brand details are to be confirmed by the developer.

Vitrified tiles in the foyer, living and dining areas, bedrooms and kitchen, and anti-skid ceramic tiles in the toilets and balconies. Tile brand, size and grade are to be confirmed by the developer.

The approved specification provides sanitary fixtures of reputed make and chromium-plated (CP) fittings in all toilets. Specific brands have not been announced, so no brand names are published on this website; ask for them in writing before booking.

Kitchen counter, sink, fittings and handover condition have not been officially specified; only the kitchen flooring (vitrified tiles) is confirmed. Confirm what is included in writing on the agreement for sale before booking.

Ceiling height has not been officially published for this project and is to be confirmed by the developer.

Each tower has premium passenger elevators and service elevators. The number of lifts per tower and their capacity and speed have not been disclosed. In 41-floor towers this is a material question — ask for it in writing.

Yes. DG backup is provided up to 3 kVA per apartment, with 100% backup for common areas. Grid power from BESCOM is provided up to 10 kVA per home.

EV charging provision has not been officially confirmed for this project.

Car parking charges are included in the all-inclusive Exclusive EOI price. The number of slots allotted per configuration has not been published at pre-launch stage, so confirm the allocation in writing before booking.

The key specifications on this page have been approved for publication. The full specification sheet, including brands and the items still marked to be confirmed, is expected alongside official launch documentation. Pre-launch is expected in November 2026 and launch in December 2026, subject to applicable approvals.

Because the developer has not specified them yet. The approved specifications cover structure, flooring, doors, plumbing and sanitary, lifts and security, and electrical. Kitchen fittings, windows, wall finishes, false ceiling, brands, EV charging, solar, and water and sewage treatment details have not been released, and publishing plausible-looking guesses would mislead buyers and could not be enforced against the developer.